Jeti Mezon 80 Pro JMP-080
Powerful MEZON PRO controllers can be used in a wide variety of applications. They come with strong BEC, full JETI Duplex EX telemetry and programmability via the Device Explorer of JETI Duplex DS/DC transmitters. Forward/reverse motor operation is also possible.
In addition, the throttle channel can optionally be connected to the receiver "EX Bus" port. A separate output pin for a throttle channel is therefore not necessary at the receiver, telemetry and control signals are transferred in both ways via just a single cable.
Properties -
Compact size
Setting via the Device Explorer of the JETI DC / DS transmitter
Real-time telemetry via JETI Duplex EX Bus (perfect for JETI DC / DS transmitters)
Telemetry data: battery voltage, battery current + BEC current, used battery capacity, RPM, PWM, controller temperature
Telemetry data reset by any transmitter switch
Powerful BEC, ideal when using JETI Assist or other gyro systems in a model
BEC with a wide input voltage range and adjustable output voltage
Activation of the throttle channel from the EX Bus is possible; the receiver then does not have to offer its own slot for the throttle channel.
Programmable with JETBOX
Operating modes: Model aircraft, forward / reverse operation
Proportional brake with a definable braking point at the throttle stick
F3A brake conveniently adjustable via the Device Explorer
Heat sink for long engine run times
High efficiency
Firmware upgrade possible
Wide range of adjustable parameters
Specs:
Weight [g] 110
Dimensions [mm] 26 x 28 x 83
Sustained current [A] 80
Telemetry Yes
Operational temperature [°C] -10 ... 85
Supply Voltage [V] 6 ... 51
Batteries LiXX 2 ... 12
Max. Current BEC [A] 15
Voltage BEC [V] 5 ... 8.4
Resistance in conducting state [mΩ] 2 x 0.475
Cable crossection (input/output) [mm²] 4.0 / 2.5
