Compact and lightweight magnetic switch suitable for 7 amps continuous current. The switching on and off process can be done from the outside with a magnet, so no drilling is necessary.
Due to the high current carrying capacity, the light weight and the compact dimensions, e.g. B. can also be used in the RC car sector.
connections
The DPSI Nano magnetic switch is available with either a 10cm (0.5mm²) or 20cm (0.5mm²) receiver connection cable.
scope of delivery
1 DPSI Nano magnetic switch, 1 magnetic switch transmitter and key fob and 1 quick guide.
documentation
You can find detailed documentation about the DPSI Nano in the Hacker Motor Wiki.
Important note: When installing, please only hold the DPSI Nano magnetic switch from the side if possible. There are sensitive components on the top and bottom that can be damaged if there is too much pressure.
Note: The DPSI switch-off process works with a Hall sensor. Hall sensors react to magnetic fields. In the case of very strong magnetic fields (e.g. electric drive), the DPSI may switch off under certain circumstances. Current cables create a magnetic field. Therefore, please route all cables that carry a very high current (>100A) past the DPSI at a distance of at least 3cm.
Technical Data
| Rated input voltage |
3.5V...10V |
| Output voltage |
unregulated |
| Quiescent current (switched off) |
approx. 6µA |
| Quiescent current (switched on) |
approx. 12mA |
| Permissible temperature range |
-20°C ... +70°C |
| Dimensions |
approximately 50mm x 9mm x 5mm |
| Weight |
approx. 4g |
| Max. continuous current |
7A |
| Max. peak current |
20A / 10A (30 seconds) |
| Drop-out losses @ 7A |
approx. 16mV |
