UniLight UniConnect Cable Connection Set 6 Secondary Connections CABLE-6S
The new plug-in system uniCONNECT works with solid knife and heavy-duty skirting boards. Thanks to the new design, high numbers of poles can now be realized in one connector with a small size - currently up to 22 pins. In addition, over 3000 mating cycles with loads up to 10A are possible. Optimally implemented for use with model making.
The male connectors offer the advantage that all cables can be soldered reliably and easily without a plastic carrier melting. There are also strain relief, detent, handle and kink protection. The contacts of the male connectors are always visible, so damage and soiling can be recognized immediately.
The biggest advantage of the system, however, is that double redundancy is already provided in the connector for important control functions. For this reason, the system not only specifies conventional pin numbers, but also distinguishes between primary pins (double, for main functions) and secondary pins (single, for lights, chassis, brakes, ...).
DIRECT CABLE
As the first group is a classic connection in which a socket is installed in the fuselage, for example, and the cables are led from the wing to a plug. This plug is inserted into the socket during assembly and locks there. The rest of the cable is pushed back into the wing.
RTR
As a fully assembled and soldered unit with 2 / 3m cable connected directly 1 to 1. This is installed on one side, the length to the servo is defined and assembled with crimp contacts. The rest of the cable is laid on the other side to the receiver and assembled there. This finished unit is always delivered in one piece.
DIY
As a kit for the model builder with all individual parts and screws for your own assembly. This makes the price very attractive, of course, always delivered as a pair of 2 pieces.
6 secondary contacts (for auxiliary functions such as lights, chassis, brakes, ...)
3000 mating cycles, 5A
Strain relief, handle and kink protection
Primary contacts
Redundancy already in the connector
Easily accessible contacts and solder joints
Classic plug with secure locking
Fully assembled with 2m cable (0.25mm²)
As a kit with all parts and screws
Dimension cover 13x42mm
Connector weight 10g without cable