UniLight 4W Night Flying Ultra Bright LED Arm 140mm Long White
Basic module for indirect model lighting during night flight.
Brand new on the market is our night flight lighting system with which your model will be finally clearly visible! The LED modules are pre-assembled on the aluminium support and are to be mounted directly on the models' wingtips (surface, on large models also on tailplane). They illuminate the model from the outside - a night flight experience of a special kind due to total visibility of the model.
Spectacular effects can be achived when combinating the module with a normale night flight lighting and a programmable controller.
The aluminium base carrier with 140mm has several hole openings so that it can be mounted in differnt distances. Depending model, vibration and flight style, an additional holm/strengthening is necessary. The base carrier defines the distance and ensures the required cooling of the high performance LEDs. A CFK tubr or CFK plate can be simply glued on the aluminium or screwed. Additionally, you can use our polycarbonate caps for protecting the LED or achieving a better light distribution.
The module is ready to use for operation with 2S Lipo (ca. 8V). When operating with 3S (12V), the enclosed resistor has to be used. Alternatively use a 4W-3S adapter cabel.
Please note that high performance LEDs can get extremly hot, up to 70°C is normal. These modules are only suited for continuous operation if a heatsink montage is used. Please check operating temperatures after installation and use our heatsink housing for example.
Electrics: 4W reference power, 8(12)V, 0.35A
Beam angle: ~140°
Light intensity: ~100 Lumen
Weight: 9g (without cable)
Delivery: ready to use with 1m connection cable, packaged series resistor for 2S and resistor for 3S enclosed
|Manufacture's Part Number||NIGHT-040-WE|