UniLight 10Wx2 Navigation & Strobe, 16mm Green
Powerful position and flash light in a housing. The profile light of the 16mm series is drop-shaped outside and fits optically also onto middle sized models. In delivery state, the profiled polycarbonate cap is simply attached and changeable. If there is no air convection at the cooling area, you can use the included cooling pins optimal.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be used. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Please check operation temperatures after installation.
Technical Data
Electricity: 4Wx2 RED/GREEN 0.35A and 6Wx2 WHITE 0,5A reference power, 8(12)V
Beam angle: >160°
Light intensity: ~100 Lumen RED
Light intensity: ~160 Lumen GREEN
Light intensity: ~320 Lumen WHITE
Dimension base panel: 16x37mm
Overall dimension: 17x38x9mm
Weight: 6g (without cable)
Delivery: ready to use with 1m connection cable and series resistor for 2S, resistor for 3S enclosed
