PowerBox PowerExpander SRS With Deans 3435
The PowerExpander SRS makes it possible to exploit all the channels provided by your radio control system when using small but highly-specified receivers. Safety is also significantly enhanced, because two receivers can be connected to thePowerExpander SRS. The integral Serial Receiver System selects any receiver, and - if an error should occur - switches over automatically to the receiver which is still operating.
This represents a simple method of doubling the number of receiver aerials. The unit is fitted with a high-current socket to ensure that the power supply can cope with the large number of channels which it makes available. It also features an output carrying the S-BUS signal, which makes it possible to use any radio control system in conjunction with an S-BUS wiring arrangement.
As powersupply we recommend the PowerBox BaseLog or the PowerBox Gemini II.
Features
- Access to a maximum of eighteen channels
- Simple wiring: the receivers are connected using a serial link
- Integral SRS, allowing the use of two receivers
- Compatible with: Futaba, Spektrum, Graupner, Jeti, Multiplex and JR
- High-current power socket MPX or Deans
- S-BUS output for use in a BUS system
- Hold/Failsafe option for each output individual
- User-variable frame rate
- Can be updated using the PowerBox USB Interface
Specifications
Operating voltage - 4.0V - 9.0V
Power supply - 2S LiPo, 2S LiFePo, 5S NiCd/NiMH
Current drain power-on state - 25mA
Maximum load current - Peak 30A
Signal input - Serial
Supported RC systems - Futaba, Spektrum, Jeti, Graupner, JR, Multiplex
Receiver redundancy - SRS
Channels - 18
Servo sockets - 18
Servo signal resolution - 0.5µs
Signal frame rate - 12ms, 15ms, 18ms
Dimensions - 55 x 40 x 14 mm
Weight - 25g
Temprature range - -30°C to +75°C
