More Views

Powerbox Champion SRS 4520

Be the first to review this product

SKU: PB-4520

1 In stock

Quick Overview:

Powerbox Champion SRS 4520
Here at PowerBox Systems we have developed yet another High-End product designed to provide supreme functionality and security for the demanding pilot. The Champion SRS is the sister of the new Royal SRS, but without the integral iGyro.
Current requirements obliged us to adopt many new ideas during the development period: all 24 outputs have a ServoMatch function, the unit features a door-sequencer as standard, and not least the latest PowerBus technology, which is destined to introduce fundamental changes in the electronic layout of large-scale models as a whole.

£449.95
£449.95
£449.95

Details

Powerbox Champion SRS 4520


Here at PowerBox Systems we have developed yet another High-End product designed to provide supreme functionality and security for the demanding pilot. The Champion SRS is the sister of the new Royal SRS, but without the integral iGyro.
Current requirements obliged us to adopt many new ideas during the development period: all 24 outputs have a ServoMatch function, the unit features a door-sequencer as standard, and not least the latest PowerBus technology, which is destined to introduce fundamental changes in the electronic layout of large-scale models as a whole.
In other respects we have retained proven concepts in further developed form. For example, the new Champion SRS is fully programmable using a menu system, controlled with the SensorSwitch and a blue backlit LCD screen.
As usual, all battery-specific and flight-relevant data can be displayed on-screen after each flight.
The door sequencer function features an integral set-up assistant which make it possible to complete the essential set-up procedure in very short order.
Over the last two years developments in serial receiver bus systems have brought them to the forefront of current technology, and the new Champion SRS features these inputs.
The Champion SRS features no fewer than four high-performance voltage regulators, allowing the use of both HV servos and conventional 6V types. With dual security in mind, each pair of regulators can be set to an output voltage of 5.9V or 7.4V.
The Servo-Match and Fail-Safe functions have also been expanded: the software now provides adjustment facilities for all 24 outputs individually, covering servo centre, travels, fail-safe and hold-mode. Servo reverse is available with a single button-press.
Six different radio control systems - Spektrum, Futaba, JR, Multiplex, Hott and Jeti - can be bound to the Royal SRS, most of them providing telemetry output of battery-, receiver- and GPS data.
The Champion SRS can be updated using the USB adapter, and is therefore equipped to cope with new systems in the pipeline, and possible future expansions.

 

Features
PowerBus: 2 outputs, 16 + 2 channels, compatible with other servo bus systems
Servo-Match function: servo centre, end-points and reverse for all 24 servo outputs
Door sequencer: six freely programmable outputs with set-up assistant
SRS: Serial Receiver System provides the facility to use receivers with serial interface: Spektrum DSM2 and DSMX, Multiplex M-Link, Futaba S-Bus, HoTT, JR X-BUS and Jeti R-SAT2
Unrestricted channel assignment for all 24 PowerBox outputs
Graphic LCD screen with 128 x 64 pixels
Extremely user-friendly menu-based programming using the SensorSwitch
Up to 18 channels - depending on the radio control system in use
Signal amplification and interference suppression for all 24 outputs
Flight recorder, recording of lost frames, fail-safe events and all battery data
Variable frame rate, range 9ms – 21ms
Two 16-bit processors for fast, high-resolution signal processing
2 x double-regulated output voltages for receivers and servos
2 regulated voltage ranges with independent selection facility, 5.9V or 7.4V
Connection facilities for Futaba, Jeti, Spektrum, HoTT and Multiplex MSB downlink bus systems
Direct transmission of battery voltage, capacity, RX-data and GPS data to the transmitter
Separate voltage and capacity display for each battery
Minimum value memory alerts the user to voltage collapses
Large-area heat-sinks for high regulator performance
Regulator monitoring, regulator error indicator
Support for three battery types: LiPo, NiMH / NiCd, LiFePo
Suppression of any servo feedback currents which may occur
Updateable with PowerBox Systems USB Interface connectors

 

Specifications
Operating voltage - 4.0V - 9.0V
Power supply - 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state - 185mA (with LCD)
Current drain Standby - 30µA
Maximum load current Peak - 4x20A
Drop-out voltage - 0.3V
Output voltage - 5.9V and/or 7.4V regulated
Signal input - serial
Supported RC systems - Spektrum, Futaba, HoTT, M-Link, Jeti, JR
Receiver redundancy - SRS
Channels - 18
Servo sockets - 24
Programmable servo outputs - 24
Servo signal resolution - 0.5µs
Signal frame rate - 9ms, 12ms, 15ms, 18ms, 21ms
Screen - LCD, backlite
Integral door sequencer - yes
Supported telemetry systems - Futaba, Jeti, Spektrum, HoTT, M-Link
Dimensions - 136 x 82 x 20 mm
Weight - 158g
Weight Sensor Switch - 15g
Weight of LCD screen - 65g
Temperature range - -30°C to +75°C

Additional Information

SKU PB-4520
Manufacture's Part Number 4520
Barcode 4259416702487
SmartOSC XBarcode 4259416702487
Brand PowerBox
Commodity Code N/A

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register