Powerbox Battery 1500 7.4v LiPo With JR 1510
The PowerBox Battery System is available with capacities of 1500 mAh, 2800 mAh, 3200 mAh and 4000 mAh, and has been developed specifically for use as receiver and servo power supplies.
A sophisticated electronic safety circuit monitors battery voltage, temperature, charge current and charge time. The integral balancer monitors and regulates the voltage of the individual cells.
All you need for safe, efficient charging of our high-quality LiPo and LiFePo4 cells is the 110 / 220 V main PSU or 12 V car adapter. This eliminates any danger of incorrect charging due to entering the wrong cell-count or battery type in the charge program. The PowerBox Battery can be left connected to the charger for long periods without suffering damage.
The battery also includes an integral voltage monitor. The external plug-in LED allows the user to detect an imminent low-voltage condition even when the battery is not in use.
A robust case protects the PowerBox Battery from all external influences and loads in the model. The mounting frame supplied as standard is installed permanently in the model, and ensures that the battery can never shift in flight. Mounting frames are also available separately. Since the PowerBox Battery can be removed from the frame quickly and easily, a single battery can be used in multiple models.
After a few years the cells in the PowerBox Battery may become exhausted, but we offer a low-cost cell replacement service, which also includes a check of the electronics.
Integrated charge technology of the latest type
Can be left in the model for charging
Only a simple mains PSU is required for charging
Integral monitoring of cell voltage, charge current and battery temperature
Integral voltage monitor with external LED
Strong external case provides protection from external influences
Mounting frame holds the battery with completely reliability
Mounting frame enables rapid battery swap
Low-cost cell replacement service
Battery type - LiPo
Capacity - 1500mAh
Nominal voltage - 7.4V
Final charge voltage - 8.4V
Charge voltage - 10V - 17V
Weight - 85g
Weight, mounting frame - 14g
Temperature range, discharge - 0°C to 60°C
Temperature range, charge - 0°C to 40°C
|Manufacture's Part Number||PB-1510|