Graupner GR-24 HoTT 12 Channel Receiver 33512
The GR-24 receiver can control up to 12 servos
With the GRAUPNER HoTT 2.4 GHz technology, the receiver has a new hopping telemetry transmission high-frequency unit with state-of-the-art components and the latest software. A hardware antenna diversity system always switches to the better antenna signal and for transmission always uses the antenna that was last used for receiving. This ensures that the back channel data are always sent via the better-positioned antenna. Without additional sensor systems, the parameters receiver voltage and temperature, as well as signal strength are transmitted.
The use of up to 75 channels ensures extreme operating reliability and immunity to external interference.
The broad reception voltage range of 3.6 V - 8.4 V (functional to 2.5 V) ensures full functionality even when voltage fluctuates.
Two LEDs signal operating status.
The sizes and weights have been reduced.
Receiver input sensitivity and thus the range have been increased further.
Servo connections in the front panel.
Failsafe, hold, OFF, and standard (channel 1 failsafe; all others hold) programmable.
Functions with SMART-BOX:
3 mixers programmable
Linear, degressive, and exponential programming of servo curves
Sum signal programmable on channel 12 output
Limitation and reversal of servo travels also possible in receiver
Failsafe, hold, and OFF programmable individually for the servo channels
Warning thresholds programmable for undervoltage, excess temperature, and low temperature
Servo test function
Dimensions (LxWxH) 46 x 31 x 14 mm
Operating voltage (2,5) 3,6 ... 8,4 V
Frequency 2400 ... 2483,5 MHz
All-up weight, approx. 16 g
Modulation 2.4 GHz FHSS
Range approx. 4000 m
Charging rate 70 mA
Temperature range -15 ... +70 °C
Aerial length 2x Draht 145 (Antenne 30) mm
|Manufacture's Part Number||33512|