UniLight 24Wx2 Navigation & Strobe, x2, T-Fuse, 18mm Green-White DUAL18F-240x2-GNWE
These wingtip lighs give outstanding light power: DUAL18F - high-end light in x2 technology for bigger planes
In delivery state, the profiled polycarbonate cap is simply attached. It can be varnished separately. It's highly transparent and unbreakable. The assembly of the lamp is astonishingly easy: With a simple surface mount, all you need is a slit of 3x36mm. In this way, the luminaire can be also mounted on smaller wing tips or fuselage. If desired, you can recess the luminaire up to 4mm, thus achieving an even smaller construction.
The cap must be glued after the final assembly.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added.
Please note that high-performance LEDs can get very hot, up to 70°C is quite normal.
These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 4-8 minutes should not be exceeded.
Please check operation temperatures after installation.
Technical Data
Electricity: 8Wx2 RED/GREEN and 16Wx2 WHITE reference power, 8(12)V
Beam angle: >160°
Light intensity: ~200 Lumen RED, 0.7A
Light intensity: ~300 Lumen GREen<, 0.7A
Light intensity: ~800 Lumen WHITE, 1.4A
Dimension mounting: 3x36x60mm
Dimension cap: 18x48x14mm
Overall 18x48x72mm
Weight: 14g (wihtout cable)
Delivery: ready to use with 1m silicone wire for 2S/8V, resistor for 3S enclosed but 2S operation strongly recommended