EMCOTEC Wing Connector Kit EWC3 Single Servo 3 wire 15.75in / 40cm A85080
The EWC (EMCOTEC wing connector) is a new plug system for R/C modelling. High value plugs "made in Germany" with a resistance of <20mOhm quarantee best contact safety. The crimp contacts are locked twice and reach best tensile force. The cable plug engages with the multipole connector on the PCB. So it's protected against accidental release for example due to vibrations.
The servo connection cables will be soldered directly to the PCB. Also 4 cables (one above one below) can be soldered. The servo cable can be fixed with a cable tie and a shrinking hose on the PCB if required. The complete PCB with the multipole connector can be fixed in the wing root of the model.
The counterpart (connector socket) is equipped with a strong 0.34mm² servo cable. The cable goes to the receiver or to the servo connector of a dual power supply.
Delivery includes EWC set consisting of EWC PCB with mounted plug, cable ties and shrinking hose, double EWC connection cable (JR) 70cm (27.56inin) with lockable counterpart connector socket.
The EWC Wing connector (Emcotec wing connector) is reverse polarity protected and high current qualified
100% safe connection because of the locking design
Small construction form due to 2,54mm contact spacing with easy mounting due to packaging
Strong high flexible cable with 0.34mm² (AWG22)cross section
Single connector version for up to two servos
Please note: We will be stocking the range of these fantastic kits in different lengths + 6 pin & 9 Pin versions so please contact us if you can not find the version you are looking for.
A85080
