2S LiIon battery 3000mAh Compact 15A from Emcotec A43065-2570
The Emcotec readymade 2S Lithium Ion battery with 3,000mAh capacity is availablable with MPX socket and JR charging sockets.
Perfectly suitable for receiver current supply. in combination with DPSI battery backers, DPSI switches or any other switch combnation.
Advantages at a glance
high capacity at very low weight
small dimensions
no balancing necessary*
low fire hazard even at short circuit
Mounting
The batteries are shipped readymade on a mounting PCB which allows the vibration-damped installation inside the model.
Convenient charging with the DPSI charging socket
Charging
If desired up to two batteries can be charged at the same time by using the DPSI charging socket (item no. PC4201, see accessories) while remaining inside the model. For single batteries charge using the lead with the JR Plug.
Notice: *To use the full capacity of the lithium-ion battery, we recommend charging the battery with the LiPo (Lithium Polymer) program of your charger. The battery is shipped without balancing cable. Please check if your charger can charge LiPo batteries without connected balancer.
Important information: Especially when used inside engine driven airplanes where stronger vibrations are possible the LiIon batteries should be mounted vibration-damped. Therefor e. g. the M3 vibration dampener set incl. screws for LiIon battery PCBs (item no. A86215) can be used (see section Accessories.)
| Technical specifications |
| Cells |
2S |
| Nominal voltage |
7,2V |
| Charge voltage |
8,4V |
| Capacity |
3000mAh |
| Continuous discharge |
15A |
| Max. Charge current |
4A |
| Balancer connection |
No |
| Batty Type |
Lithium Ionen |
| Dimensions & Weight |
| Length |
99mm |
| Width |
37mm |
| Height |
20mm |
| Cable Length |
ca. 180mm |
| Cable Cross section |
MPX: 1mm² |
| Weight |
ca. 114g |
